MicroVision ShowWX Guide de l'utilisateur télécharger pdf (Page 9)

How To Reset Default Settings

To reset all user selectable settings to factory defaults.

Press the button to bring up the on screen menu.

Use the or buttons to navigate to SYSTEM and press .

Use the or buttons to navigate to RESET DEFAULTS and press .

Press the or buttons to select YES and press .

How to Check Remaining Battery Life

Follow these instructions to view how much battery life is remaining.

Press the button to bring up the on screen menu.

Use the or buttons to navigate to SYSTEM and press .

Use the or buttons to navigate to PROPERTIES and press .

Use the or buttons to navigate to BATTERY INFORMATION and press .

Care & Maintenance

How To Clean the Window

Fingerprints and other debris may impact the image quality. Keep the window clean for best image quality.

Apply a non-abrasive camera lens cleaner to a soft, dry cloth.

Lightly wipe the cleaning cloth over the window until clean.

Note:

» Do not attempt to use solvents or other harsh chemicals as it may damage the window.

» Make sure cleaning cloth is free of dust or debris to avoid scratching the window.

How to Store & Transport

Proper care should be taken to safely store and transport the projector. To store and transport the

SHOWWX use the included storage pouch. Use care and do not drop the SHOWWX or spill liquids on it.

How to Use the Audio Jack

The audio jack on the SHOWWX works only when the Audio signal is is combined with the Video signal.

The Audio Jack is for output only.

Troubleshooting

Problem Cause Solution

The projector does not

turn on.

Battery not inserted

correctly.

Battery not charged.

Make sure the battery is

correctly inserted.

Make sure the battery is fully charged.

The projector colors

look incorrect.

Different Color Mode

may be selected.

Change to preferred Color Mode.

The projector randomly

turns off but the Blue

LED stays on.

The projector may be

out of the recommend-

ed operating range.

Make sure the projector is well ventilat-

ed and within the operating temperature

range. Turn off for 5 minutes and restart.

Not working with my

iPod.

Incompatible iPod,

- OR –

Incorrect video mode.

Make sure the iPod has TV-out functionality

and is enabled.

Make sure the SHOWWX video mode is

correct for the cable being used.

The projector won’t turn

off or on and the Blue

LED stays on.

System is frozen. Press and hold the Power button for 20

seconds. If this does not work, remove

battery. Then re-insert and turn on.

I can’t connect to my

laptop.

SHOWWX VGA Dock

sold separately.

Purchase the SHOWWX VGA Dock.

The projector doesn’t

work with my cell

phone.

Not all cell phones

have the TV-out

feature.

Refer to your cell phone manufacturer’s

user guide if TV-out is available and how

to conﬁgure.

The image looks a little

fuzzy.

Debris on Window,

- OR -

Image is misaligned.

Clean the Window,

-OR-

Adjust Image Alignment.

The green LED keeps

blinking while charging.

The battery is not cor-

rectly inserted in the

SHOWWX.

Make sure battery is correctly inserted

into the SHOWWX.

The red LED is blinking. Out of operating range.

Temporary problem.

Turn projector off. Remove battery.

Re-insert and power on.

Battery doesn’t charge. Battery may not be

capable of holding a

charge.

Install new battery.

The red LED is constantly

on even after trying to

restart.

System failure. Contact Customer Support.

1 2 3 4 5 6 7 8 9 10 11 12 13

Commentaires sur ces manuels

Pas de commentaire

MicroVision ShowWX Guide de l'utilisateur Page 9

Commentaires sur ces manuels